How To Remove Water Spots From Brushed Nickel Faucets

Download Commodity

Download Article

The finish used on brushed nickel is sensitive and tin make cleaning somewhat difficult. When cleaning brushed nickel, yous should use the gentlest method possible. Don't use annoying, alcohol-based, acrid or solvent-based cleaners on brushed nickel. These cleaners can damage the terminate. Although vinegar does contain acid, you can dilute it for use on stubborn mineral deposits if other methods oasis't worked. Do this carefully and past testing an inconspicuous area get-go.

1. 1

   Wipe with a soft, dry material. Detect a make clean, soft, lint-complimentary textile. Terry textile works well, but any soft cotton blend can prove as useful. Remove dust, smudges, and grease. Apply pocket-size, circular motions.^[1]

   • If yous're cleaning a light shade, remove the shade earlier cleaning information technology.

2. 2

   Intermission up crud with a damp cloth and putty knife. Wet a cloth with warm water. Printing the cloth onto the area with buildup. Use a putty pocketknife to gently and carefully scrape the gunk only (not the nickel itself). Vitrify the surface area with a soft, dry cloth.^[2]

   Ad

3. 3

   Employ a mild lather solution. Soak a soft, clean fabric in warm water with a squirt of detergent. Wipe your nickel detail with the wet material. Rinse or sponge it clean with water. Dry out it thoroughly.^[3]

   • Dishwashing soap is effective because it cuts away grease while remaining fairly gentle.
   • The simpler the soap, the improve. Scented soaps often contain additives that only create farther streaking rather than removing it.

Advertisement

1. one

   Make up one's mind whether wax is compatible with your product. Check the product's instruction manual, if you however take it. Alternately, visit the make'due south website and await at the FAQ department or specific production manual. Try calling the company's client service number if you nonetheless tin't decide your product's compatibility with wax.

   • Some brands recommend using wax paste to polish their brushed nickel products. Even so, others suggest against information technology.
   • Polishing brushed nickel helps to restore its sheen.^[4]

2. two

   Apply wax paste. Try a very light polish using Autosol. Spread a sparse layer of wax over your brushed nickel detail. Allow it to sit down for a few minutes.^[5]

   • You can find this blazon of polish at hardware or automotive stores.^[6]

3. iii

   Buff the wax off. Remove the wax with a soft, make clean cloth. Use round motions to vitrify your product clean. Move to a new expanse of the textile, as needed, so that you lot don't get out wax remainder on the nickel.^[7]

Advertisement

1. 1

   Dilute white vinegar with water. Create a solution made with half water, half white vinegar. If your particular is detachable, such as a shower head, brand enough solution to completely soak the particular. Use a container that volition fit in the microwave to save time.^[8]

2. two

   Test a concealed area. Stir the solution well. Dip a cotton swab into the solution. Apply the cotton swab to a hard-to-run across area of your nickel product. Let it sit for 30 minutes.^[9]

   • If no visible damage occurred to your brushed nickel finish, you tin continue to cleaning the entire item with the vinegar solution.

3. 3

   Warm upward the vinegar solution. Rut the solution in a microwave, using a microwave-safe container. Alternately, yous tin can oestrus the solution in a large bucket on the stovetop. Heat the solution only until it's warm, not hot or boiling.^[10]

4. 4

   Spray or soak your item. If the nickel slice is small enough, dunk it directly into the solution and allow it to sit for xxx minutes. If the nickel piece cannot exist removed or is too large, cascade the solution into a spray canteen and dunk the brushed nickel with information technology. Allow the solution to sit on the surface of the metallic for 30 minutes.^[11]

5. 5

   Wipe abroad the mineral deposits. Remove the item from the solution, if applicative. Try wiping the mineral deposits off with a rag. If that doesn't work, use soaked cotton wool wool or a toothbrush to clean the deposits.^[12]

   • If your detail is a shower nozzle, use a paperclip to unclog the jet holes.
   • If in that location are still mineral deposits remaining, repeat the diluted vinegar awarding again.^[13]

6. 6

   Rinse your item clean. Don't get out vinegar sitting on the product's surface. Use a bucket of h2o or a rag moisture with water to thoroughly rinse the brushed nickel. Buff dry with a soft cloth to avoid water stains.

Advert

Add New Question

• Question

  How tin can I remove hard water stains?

  

  Apply a diluted vinegar solution. Mix one-half white vinegar and one-half water. Rub the solution on in circular motions with a rag or toothbrush. Once finished, rinse and buff dry.

• Question

  How do I remove stains from brushed nickel?

  

  Rinse your item clean. Don't get out vinegar sitting on the product's surface. Use a bucket of water or a rag wet with water to thoroughly rinse the brushed nickel. Buff dry with a soft cloth to avoid water stains.

• Question

  How can I clean spots on a tarnished, brushed nickel mirror frame?

  

  Use a soft textile, wet or dry, and some elbow grease. If that doesn't work, use a l/50 vinegar and water mixture. Wipe down the frame with the solution using cotton wool wool or a toothbrush. Rinse the frame make clean and buff dry out.

• Question

  I used undiluted white vinegar to take off hard water deposits. Left it to soak for many hours. Now there is a mark that looks like the electrical record I used to put the bag of vinegar on with. I know it is non just tape residue, most likely it is due to the vinegar. Is there a way to restore the finish?

  

  If y'all know the make of faucet, look on the manufacturer's website to see what they recommend for their products.

Ask a Question

200 characters left

Include your electronic mail address to go a message when this question is answered.

Submit

Advertisement

Video

Cheers for submitting a tip for review!

• Never use sandpaper on brushed nickel.

• Turn off the lights and circuit breaker earlier cleaning light fixtures. Don't allow water to come in contact with any electrical components.^[14]

• Don't use steel wool or scratch-pad sponges on brushed nickel.

• Don't use bleach, oven cleaner, rust cleaner or toilet cleaner on your brushed nickel.^[15]

• Avert harsh chemicals. As a full general dominion, annihilation that requires y'all to don protective gear is probably besides harsh to use on brushed nickel. Oven cleaners and well-nigh ammonia-based cleaners are too abrasive and could cause the finishing to article of clothing off right aslope the grime or rust.

• Be wary of warranty. Many surfaces fabricated from brushed metal, like bath faucets, come with a warranty that could be voided if you use abrasive methods to clean them.

Advertisement

Things You lot'll Need

• Soft cloths
• Putty pocketknife
• Mild detergent
• Water
• Microwave-prophylactic basin or bucket
• Wax paste
• White vinegar
• Cotton swab
• Saucepan or spray bottle
• Paper clip
• Cotton wool or toothbrush

Most This Article

Article Summary 10

You can make clean brushed nickel using a soft, lint-free cloth. Avoid using chemicals or abrasive cleaners on your nickel since information technology could damage it. Wet your cloth with water and gently wipe down the nickel. If the nickel is particularly dirty, add a bit of dish soap to the cloth. For stubborn grime, endeavor using a putty pocketknife to scrape it off. To learn how to smooth brushed nickel, keep reading!

Did this summary aid yous?

Thanks to all authors for creating a page that has been read 233,480 times.

Did this article help y'all?

Source: https://www.wikihow.com/Clean-Brushed-Nickel

Share this post